HIGH HEATING POWER – allows you to quickly heat water to the optimal temperature of 20°C.
OVERHEATING PROTECTION – the water flow sensor protects against damage to the device.
SPECIFICATION – dimensions (L/W/H): 42.5/26/19cm; packaging dimensions (L/W/H) 48/29/24.5cm; weight 5.1kg; power 2800W (at 20°C).
EASY INSTALLATION – simple construction and uncomplicated operating principle mean that the heater can be quickly connected to the pool filter pump.
DIGITAL REGULATION – the device is equipped with a precise temperature regulation system.
SPECIFICATION
Bestway product code: 58259
power supply: 220-240V ~50Hz
power: 2800W (at 20°C)
maximum temperature: 40°C
capacity: up to 3785l/h
recommended amount of water: 1.520-17.035l
dimensions (length/width/height): 42.5/26/19cm
packaging dimensions (length/width/height): 48/29/24.5cm
cable length: 350cm
weight: 5.1 kg
Heating your pool water not only ensures overall comfort. It also allows you to enjoy swimming or relaxing in the water more quickly after filling the pool. It also allows you to swim in the pool on cooler days, when the water cannot warm up sufficiently from the sun and ambient temperature. Using a water heater allows you to relatively quickly raise the water temperature to the optimal level of 20°C . The device is designed to operate with filter pumps with a capacity of up to 3785 l/h. Its simple design and straightforward operation mean the heater can be quickly connected to the pool’s filtration system . The device works effectively in pools with capacities ranging from 1520 l to 17035 l . The water heating time and the maximum temperature that can be achieved depend on the initial water temperature and the ambient temperature. A differential circuit breaker located in the heater ensures user safety, cutting off the power if any irregularities are detected. This solution provides protection against electric shock and is essential for electrical devices operating in direct contact with people. The device responds to changes in current flow at a difference of 10mA, which is the limit value that guarantees user safety.
PRODUCER:
Bestway Inflatables and Material Corp.
No. 208 Jin Yuan Wu Road
Shanghai, 201812, China
Tel 86 21 69135588
info@bestwaycorp.com
RESPONSIBLE PERSON IN THE EU:
BESTWAY EUROPE S.p.a.
VIA RESISTENZA, 5
20098 SAN GIULIANO MILANESE (MI)
VAT no.: IT 02561670130
kontakt:
e-mail: compliance@bestwaycorp.eu
responsible person:
Laura Di Dio l.didio@bestwaycorp.eu
WARNING CONTENT:
WARNING
When installing and using this electrical appliance, always follow the basic safety precautions.
precautions, including the following:
IMPORTANT SAFETY INSTRUCTIONS READ AND FOLLOW ALL
WARNING:
• The water heater must be checked before each use. During control tests
follow the instructions in the user manual.
• The water heater must be powered by a residual current device (RCD) with a differential current not exceeding
exceeding 30mA.
• The wall power supply should be located more than 4 m (13.1″) from the pool and on
height of at least 1.2 (3.9″) meters.
• Live parts, except those supplied with extra low voltage, are not
exceeding 12 V, must not be accessible to persons staying in the pool; Parts containing
electrical components, with the exception of remote control devices, must be placed or
attached so that they cannot fall into the water.
• RISK OF ELECTRIC SHOCK – The water heater must not be used while people are in the pool.
• If the power cord is damaged, it must be replaced by the manufacturer in order to avoid a hazard,
its service representative or similarly qualified person.
• Extension cords cannot be used.
• Do not bury the wire. Position the wire to minimize the possibility of damage from lawn mowers,
secateurs and other equipment.
• The water heater should not be placed or left at a temperature lower than 10oC / 50oF ~ 38oC / 100oF.
• It is essential that the plug is accessible once the pool is set up.
• Before using the water heater, check that the pool has been filled with water.
• Pool heaters are designed to be used in a specific amount of water; check that the Heater
water is appropriate for the amount of water in your pool, along with the water flow appropriate for the Pump
filter or sand filter.
• RISK OF ELECTRIC SHOCK – This equipment must be mounted at least 2 m (6.6″) away from
all metal surfaces.
• The heater must be powered by a grounded electrical installation.
• NOTE: Always keep the plug dry, connecting with a wet plug is strictly prohibited!
• This device can be used by children from 8 years of age and people with limited
physical, sensory or mental abilities or lack of experience and knowledge, only if
they are provided with supervision or instruction on how to use the equipment safely and they understand
associated risks. Children should not play with the device. Cleaning and maintenance are not
can be performed by children without supervision.
• Cleaning and maintenance must be performed by an adult over 18 years of age who is
familiar with the risk of electric shock.
• Always read the instructions before using or assembling/disassembling this device.
• For electrical safety, the product contains a built-in differential circuit breaker that detects
possible current leakage. If the detected current value is more than 10mA, the device
disconnects the power supply. In this case, unplug the product from the power supply and stop using it immediately.
use. Do not reset the product yourself. To have the device checked and repaired, contact
local service representative.
• The PRCD plug must be tested before each use to avoid the risk of electric shock.
• Do not plug or unplug the device from the socket with wet hands.
• Always unplug your device:
– On rainy days
– Before cleaning or other maintenance procedures
– Leaving unattended during vacation.
• During longer periods when the product is not used, for example in winter, the pool set should be
be disassembled and stored indoors.
• Keep the instructions in a safe place. Each time you reassemble the pool,
it is recommended to refer to the user manual.
• This water heater is only suitable for use with portable pools. Do not use it in pools that
which are permanently built in. Portable pools are designed so that they can be dismantled
for storage and reassembly. Permanent pools are built on or in the ground so that they cannot be
disassemble for storage.
• Never add chemicals to water. Always add chemicals to water to avoid
the occurrence of strong evaporation or violent reactions that may cause dangerous
spraying chemicals.
• Electrical installations should comply with national wiring regulations, where applicable.
If you have any questions, consult a qualified electrician.
• After 3-5 years of using the heater, contact a qualified technician to check
system for security and performance.
• The main components of an electrical appliance, such as the heating element, should be checked and
(if necessary) replaced by a qualified person.
• Handle the water heater with care. Never pull or carry the appliance by the power cord.
Keep cables away from sharp objects, oil, moving parts, and hot air.
should never be placed near a heater.
• This product is not intended for commercial use.
IMPORTANT: Using the heater without a proper connection to the mains is dangerous.
and may lead to irreversible damage to the water heater.
WARNING: Before inserting the plug into the socket, ensure that the socket current rating is
is suitable for the pump.
SAVE THESE INSTRUCTIONS